If your building is anywhere near the sea, your windows and doors work harder than they would inland. Salt in the air and high humidity attack metal and moving parts, and ordinary products can age quickly in these conditions.
What causes corrosion at the coast?
Sea air carries tiny salt particles, which settle on frames, glass, hardware and fasteners. When salt stays on a surface and meets moisture, it can start to damage coatings and metal. Heat, humidity and wind-blown sand make the effect stronger.
Where does it show up first?
- Exposed aluminium frames where the coating is scratched or thin
- Screws, fasteners and fixing points
- Handles, locks, hinges and rollers
- Tracks and drainage channels, where salt and dirt collect
Protection works as a system
Coastal durability doesn’t come from one feature. It depends on several parts working together:
- The right coating: a good architectural coating protects the aluminium from the environment. For exposed coastal locations, a high-quality coating system such as PVDF is strongly recommended, chosen to suit the project.
- Proper pretreatment: the surface must be prepared correctly before the coating is applied, because the coating only protects as well as it bonds.
- Compatible fasteners: screws and fixings should be suitable for the environment and compatible with aluminium, since the wrong metals together can cause corrosion.
- Quality seals: durable weather seals, such as EPDM, help keep water and salt out of the joints.
- Corrosion-resistant hardware: handles, locks, hinges and rollers should be chosen for coastal use.
Installation matters too
Coated aluminium should be protected during construction from cement, mortar, acids, solvents and welding sparks, which can damage the finish. Drainage paths should be kept clear so water can leave the frame.
Maintenance is part of the protection
Even the best system needs care in a marine environment:
- Rinse and clean frames, glass and hardware regularly with mild soap and clean water, and dry them well. In coastal areas, do this more often than inland.
- Avoid abrasive pads, strong acids, alkaline cleaners and solvents, which can damage coatings.
- Keep tracks, drainage channels and weep openings clear of dirt, sand and debris.
- Inspect and lubricate moving hardware as the manufacturer recommends.
Set realistic expectations
No product can be guaranteed to stay completely free of corrosion near the sea. The right system and regular cleaning make a very big difference to how long an opening looks good and works well, but they reduce the risk and don’t remove it.
Questions to ask before you choose
- Which coating system is proposed, and is it suitable for an exposed coastal site?
- Are the fasteners and hardware designed for a marine environment?
- What maintenance is needed, and how often?
- What does the warranty cover and exclude in a coastal location?
Talk to Luxora
Building near the coast? Request a quote and share your drawings and location, and our team will recommend a system designed to handle salt air and humidity.